Tobacco Film

Tobacco film is a type of film used to package tobacco products. It typically refers to a type of plastic film made from materials such as polyethylene, polypropylene, polyester, etc. and is used to protect tobacco from moisture and other contaminants.

Product Details

Thickness: 15, 18, 25, 27, 30, 35mic, Special specification can be customized according to customer requirements.
Width: Small width, 10-30cm

Free Sample Get A Quote

Features

* Good anti-static performance,high stiffness,high slippery,high gloss,low haze
* Wide range of heat sealling,high sealling strength,excellent water vapor barrier
* Uniform thickness and wide range of shrinkae contro
* At the same time have a certain anti-red anti-wrinkle,scratch-resistant ability to wear,the packaging effect is smooth and beautiful.

Non-Cigarette Package Uses

In addition to tobacco packaging,in the field of non-cigarette package uses a wide range of square boxes health products, medicines, tea, food, cosmetics, flexible packaging.

Cigarette Packets Use

Soft-care cigarette packets with a regular film or low-shrink film,hard-box cigarette pack with high-shrink film,a box of cigarettes with ordinary tobacco film or high shrink film packaging.

Technical Information


Technical information
ITEM		PYWS	PYZ	PYGS
MD		4-5	6-7	≧8
TD		4-5	6-7	≧8
ITEM		TEST METHOD	UNIT	DATA
Heat Shrinkage	TD	ISO 14616	%	PYWS PYZ PYGS
	MD			4-5 6-7 ≥8 4-5 6-7 ≥8
Tensile Strength	TD	ASTM D882	Mpa	≧270
	MD			≧140
Elongation At Break	TD	ASTM D882	%	≦70
	MD			≦180
Haze		ASTMD1003	%	≦2.0
Heat Seal Intensity		ASTM F2029	N/15mm	≧2.4
Gloss		ASTMD2457	%	≧85
Room Temperature Friction	Front/back	ASTM D1894	-	≦0.45
	Back/back			≦0.40
60 degrees dynamic friction	非／金			≦0.20

Production Process

Ingredients and Mixing: Ingredients and additives are proportionally mixed according to the formula, thoroughly blended using mixing equipment to ensure uniform distribution of raw materials.
Melting Extrusion: The mixed raw materials are melted at high temperature and extruded into sheets or films using an extruder.
Cooling and Traction: The extruded film undergoes rapid cooling through a cooling device and continuous traction by a traction device to maintain its smoothness and continuity.
Stretching and Thermal Setting: The film is stretched to a certain extent and then thermally set to stabilize its dimensions and relieve internal stresses.
Winding and Cutting: The formed film is wound using a winding device and can be cut into different sizes of cigarette film according to requirements.