bannerny
Blog
Home > Blog >

Product categories

hot Products

Disposable Medical Face Mask

Disposable Medical Face Mask

Disposable Medical Mask Material: NonWoven Fabric+Meltbl

Disposable KN95 Face Mask

Disposable KN95 Face Mask

Disposable N95 Mask Material: 5 ply Non-woven fabric Col

Disposable N95 Face Mask

Disposable N95 Face Mask

Disposable KN95 Face Mask Material: Needle punched cotto

Infrared Forehead Thermometer

Infrared Forehead Thermometer

Infrared Forehead Thermometer Sample: Free Brand: Orient

Disposable Isolation Coveralls

Disposable Isolation Coveralls

General purpose, Cleanroom, Construction/building, Clean

Disposable Medical Gloves

Disposable Medical Gloves

Disposable Medical Gloves Material: PVC Color: Transpare

Disposable Isolation Gowns

Disposable Isolation Gowns

PE Isolation Gown, Disposable PE Isolation Gown, Isolati

Medical Protective Mask

Medical protective mask is suitable for the protection of airborne respiratory infectious diseases by medical personnel and related staff. It is a kind of self-adhesive filtering medical protective equipment with high protection level, especially suitable for contact with airborne transmission during diagnosis and treatment activities. Or wear it for patients with respiratory infections that are transmitted by droplets at close range. It can filter the particles in the air and block droplets, blood, body fluids, secretion droplets, etc. It is a disposable product. Medical protective masks can prevent most bacteria, viruses and other pathogens. WHO recommends that medical personnel use protective masks against particulates to prevent virus infection in the hospital air.
 

Medical protective masks meet the GB19083-2003 "Technical Requirements for Medical Protective Masks" standards. Important technical indicators include non-oily particle filtration efficiency and airflow resistance. The specific indicators are as follows:

1. Filtration efficiency: Under the condition of air flow rate (85 ± 2) L / min, the filtration efficiency for aerodynamic median diameter (0.24 ± 0.06) μm sodium chloride aerosol is not less than 95%, which is in line with N95 ( Or FFP2) and above. Can block airborne infection factors <5μm in diameter or close contact with droplet-borne infection factors.
 

2. Inspiratory resistance: Under the above flow conditions, the inspiratory resistance does not exceed 343.2Pa (35mmH2O).
 

3. The sample sprayed to the mask under the pressure of 10.9Kpa (80mmHg), there should be no technical indicators such as penetration inside the mask.
 

4. The mask must be equipped with a nose clip. The nose clip is made of a flexible plastic material with a length of> 8.5cm.
 

5. The synthetic blood is sprayed on the mask sample at a pressure of 10.7kPa (80mmHg), and the inside of the mask should not penetrate.

Medical Protective Mask

Request a free

Have A Question? You Can Call Us Or Email Us By Sending A Message Below.